STAHL electric chain hoists 415 volt, 3-phase for sale.

We are main UK agents/ distributors for Stahl Cranes, and offer the 3 phase Stahl hoists to suit many applications. All are contactor controlled with no PCB's in the panels.

Below is hook loss dimensions of most sizes of Stahl Electric Chain hoists. Various speeds as well as hook suspension, push along trolleys and powered travel hoists are shown. If ordering powered travel travel there is also a slower option of 10/2.5 meters per minute for smoother cross travel. Add £69.00 plus vat. Standard cross travel speed is 20/5 meters per minute.

The headroom loss or "C dimension" for each hoist in bold print. These hoists are suitable for using with gantry crane applications, jib cranes A Frames, and monorails, and work really well with our Magnetek radio remote controls and our smooth inverter driven crane end carriages.

 

Call Jo or Chloe on 01527 894 825 for details.

CAPACITY / kgs
M/MIN
TYPE
HOOK
PUSH TROLLEY
POWER TROLLEY
20M/MIN
20/5M/MIN
125kgs
8/2
ST0501-8/2 1/1

367mm

375mm

342mm
342mm
 250kgs
8/2
ST0502-8/2 1/1

367mm

375mm

342mm
342mm
500kgs
4/1
ST0502-8/2 2/1

428mm

436mm
403mm
403mm
500kgs
8/2
ST1005-8/2 1/1
372mm
387mm
377mm
377mm
1000kgs
4/1
ST1005-8/2 2/1

428mm

437mm

437mm

437mm

1000kgs
8/2
ST2010-8/2 1/1

467mm

432mm
432mm
432mm
1600kgs
8/2
ST3016-8/2 1/1
509mm
507mm
507mm
507mm
1600kgs
8/2
ST3216-8/2 1/1
557mm
558mm
558mm

558mm

2000kgs
4/1
ST2010-8/2 2/1

547mm

545mm

545mm

545mm

2500kgs
6.3/1.5
ST5025-6/1 1/1
2500kgs
8/2
ST5025-8/2 1/1
3200kgs
4/1
ST3016-8/2 2/1

575mm

570mm
570mm
570mm
3200kgs
4/1
ST3216-8/2 2/1

657mm

659mm
659mm
659mm
5000kgs
3.2/0.75
ST5025-6/1 2/1
697mm
N/A
707mm
707mm
5000kgs
4/1
ST5025-8/2 1/1
697mm
N/A
707mm
707mm
 

The nett prices for the STAHL chain hoist shown above are based on the following specification:-

  • 3.0 meter lifting height, of actual chain drop
  • 48V low voltage Tele Mech controls
  • Plug in IP65 rated control pendant; 1m shorter than the chain
  • Chain box included. (SCCB)
  • Hoist enclosure protected to IP55.
  • Hoist over load protection via slipping clutch
  • Zinc plated load chain, as standard
  • 12 month warranty period
  • 415v 3 phase
  • Suitable for crane application use.

 

 

Email us your inquiry.
USED STAHL CHAIN HOISTS: ENTER HERE.
NEW Demag hoists: ENTER HERE.

All parts of the UK covered for crane sales, installation, testing, repairs, maintenance even; Barnet, Pontypridd, Durham, Worksop, Thatcham, Knaresborough, Markyate, Witney, Coleshill and Moreton-in-Marsh!